Japanese Site

Thai Site

CONTACT

WD series | Multiple oscillation mode ultrasonic cleaner
[Ultrasonic Cleaners [ Industrial use ]]

Overview

Four oscillation mode can cover wide range of contamination and matches for various objects. 
Digital controlled generator circuit optimized stable output power.

Features
  • Digital technology enabled regulated power to the generator and realized stable cleaning.
  • "Self diagnostic function" is built-in.
  • Rich remote control function; Output power on / off or control, Operation mode, Alert signal.

Four Oscillation can cover wide range of contamination and matches for various objects
1. Dual frequency mode
Delivers good agitation especially for cavitation spot and carry ultrasonic power farther from the transducer efficiently.
Generate pumping effect and effectively cleans inside narrow tube or thru-hole PCB.

2. FM (Frequency Modulation) mode
Vibration nodes of standing wave move efficiently and clean works evenly in a cleaning tank.
Cavitation position moves by modulation sweep, erosion damage can be reduced.

3. Single frequency mode
Generates strong cavitation power and removes stif stains.

4. Pulse Oscillation mode
Intermittent ultrasonic pulse output cause gentle cleaning power. It also effective to degas the water.




Purpose / Object
  • Semiconductor industry: IC, Transistors, Si wafers, Photo mask
  • Fine Electronics: PCB, HDD parts, glass substrate of LCD
  • Automotive: Piston, Fuel pump, Electrical parts

Generator

Specification

Type WD-600-28T WD-600-40T WD-1200-28T WD-1200-40T
Oscillation Dual frequency (DUAL)
Frequency Modulation (FM)
Single frequency (SINGLE) 
Pulse Oscillation (PULSE)
Output power DUAL/FM 400 W 800 W
SINGLE 600 W 1200 W
PULSE Max. 600 W Max. 1200 W
Output frequency 28 kHz
40 kHz
28 kHz
40 kHz
Power source  200, 220, 230, 240 V AC 
50/60 Hz 1200 VA
200, 220, 230, 240 V AC
50/60 Hz 2400 VA
Dimension 330(W)x463(D)x150(H)mm
(exclude raised part, foot)
Weight 11 kg 12 kg
* Voltage must be selected when order is made.
list1 I/O interface: 
 Output power ON/OFF (contact point)
 Output power control (8 points)
 Irregular output warning (Relay output, on state when error)
list1 DUAL/FM frequency sweep range: 1 kHz from center frequency
list1 Output power control: 20 - 100 % (8 steps)
list1 Display: Output power level indicator (LED)
list1 Operating condition: Tmp.: 0 to 40 deg C, Rel. Hmd.: 0 to 80 % (no condensation)
list1 Power cord: 3.5 m
list1 Option: I/O remote cable (5, 10 m), Terminal block


矢印


Example setup

Example set up WD series


Vibration unit


Specification

* Customization of vibration unit is available include such as low pressure use.
N Type | Immersible boxN type 投込みタイプ
Type WS-600-28N WD-600-40N WS-1200-28N WD-1200-40N
Generator WD-600-28T WD-600-40T WD-1200-28T WD-1200-40T
Max. Input Power 600W 1200W
Frequency 28kHz
40kHz
28kHz
40kHz
Effective Area 350x200
420x300
Dimension
WxD x H mm
(exclude raised part)
350x200x100 350 x 200 x 75 420 x 300 x 100 420 x 300 x 75
Material Case: SUS304 (SUS316L optionally available)
Weight 14kg 11kg 18kg 14kg
list1 Liquid temperature: 5 - 80 deg. C
list1 Transducer : Bolt-clamped Langevin type
list1 Vibration unit cord length: 2.5 m(blade part 2m) + Output cord length 3.5 m

F Type | Vibration plateF type 振動板タイプ
TypeWS-600-28F WD-600-40FWS-1200-28F WD-1200-40F
Generator WD-600-28T WD-600-40T WD-1200-28T WD-1200-40T
Max. Input Power 600W 1200W
Frequency 28 kHz
40 kHz
28 kHz
40 kHz
Effective Area 350x200
420x300
Dimension
WxD x H mm
(wires not included)
390x240x80 390 x 240 x 57 460 x 340 x 83 460 x 340 x 57
Material Plate: SUS304 (SUS316L, hastelloy optionally available)
Packing: EPDM t=3mm (viton or others optionally available)
Weight 10 kg 8 kg 16 kg 13 kg
list1 Liquid temperature: 5 - 100 deg. C
list1 Transducer : Bolt-clamped Langevin type
list1 Vibration unit cord length: 3.5 m + Output cord length 3.5 m

S Type | Tank S type 槽タイプ
Type WS-600-28S WD-600-40SWS-1200-28S WD-1200-40S
Generator
WD-600-28T WD-600-40T WD-1200-28T WD-1200-40T
Max. Input Power 600 W 1200 W
Frequency 28 kHz
40 kHz
28 kHz
40 kHz
Effective Area 366 x 246
500 x 300
Dimension
WxDxHmm
(exclude raised part,
include rubber foot)
outer 422x302x405
550x350x402
inner 366x246x248 (23 L) 500x300x224 (35 L)
Material Tank: SUS304 (SUS316L optionally available)
Drain valve
Rc15A (1/2B) Rc20A (3/4B)
Weight 22 kg 19 kg 39 kg 34 kg
list1 Liquid temperature: 5 - 100 deg. C
list1 Transducer : Bolt-clamped Langevin type
list1 Vibration unit cord length: 3.5 m
list1 Option: Basket (KG10, KG11)
矢印to Option Parts


SH Type | Tank with heaterSH type ヒーター付槽タイプ
Type WS-600-28SH WD-600-40SHWS-1200-28SH WD-1200-40SH
Generator
WD-600-28T WD-600-40T WD-1200-28T WD-1200-40T
Max. Input Power 600W 1200W
Frequency 28kHz
40kHz
28kHz
40kHz
Heater 2 kW 3 kW
Effective Area 370 x 250
500 x 300
Dimension
WxD x H mm
(exclude raised part,
include rubber foot)

outer 580x310x406 710x360x405
inner 370x250x250(23 L) 500x300x224(35 L)
Material Tank: SUS304 (SUS316L optionally available)
Drain valve
Rc15A (1/2B) Rc20A (3/4B)
Weight 28 kg 25 kg 46 kg 40 kg
list1 Liquid temperature: 5 - 100 deg. C
list1 Transducer : Bolt-clamped Langevin type
list1 Vibration unit cord length: 3.5 m
list1 Option: Basket (KG10, KG11)
* Heater is for water only. Do not use other liquid.
* Separate power source for the heater is required.

矢印to Option Parts


Industrial Equipment TEL:81-532-41-2774