Japanese Site

Thai Site

CONTACT

WDX series | Digital "DYNASHOCK" ultrasonic cleaner|WDX-600-I / WDX-1200-I / WDX-600-Ⅱ
[Ultrasonic Cleaners [ Industrial use ]]

Overview


"DYNASHOCK" modulation technology by full digital control circuit enables variety of applications from physically tough stains to micro-fine contamination with small risk of damage of erosion.



DYNASHOCK Modulation

The technology to control the mixture ratio of two different frequency generated  by the same transducers keeping the same output power. It delivers best matching ultrasonic cleaning power for the cleaning work.

Lower frequency applies for hard and strong power to hard and stubborn contamination or stains. Higher frequency cleans fine and delicate structure with minimum damage to the cleaning work.

The power ratio of two frequencies is named as "DM ratio". Where the low frequency power is PL and High frequency power is PH, DM ratio can be calculated as PL / PH.

wdx modulation



 list1 Sample image of alminum foil erosion test vs. DM ratio.
  (Output popwer is 600 W continuous)

comparison examples


Feqtures
list1 Dynamic Modulation can avoid damage and enables wide range of cleaning from fine material to hard structure.
list1 Modulation ratio can be adjusted and spread high acoustic pressure around entire area in a tank, thus the equable cleaning is achieved.

Sound pressure distribution map  


list1 Full digital control also realized advanced functions as below.
Optimized cleaningFrequency optimization and output power control enables stable Ultrasonic cleaning.
Easy MaintenanceAutomatic tuning function eliminates the manual calibration of oscillator when exchanging the transducer unit.
Power SourceWide range of power voltage is supported. 200 V AC to 240 V AC±10%
Monitoring FunctionOutput power can be controlled from the front panel.
Self DiagnoseIn the case of error, the error message shows the problems.
Sweep FunctionFrequency sweep operation adds even more even distribution of power in a tank.
 
Purpose / Object
  • Metal, mechanical parts cleaning
  • Fine, Micro-mechanical parts cleaning
  • PCB cleaning, Solar cell material cleaning
  • HDD parts, LCD parts, Optical parts cleaning
  • Fine cleaning for Semiconductor industry
  • Delicate cleaning for medical or food industry 

Go to Generator specification
Go to Vibration unit specification

Generator

Specification

TypeWDX-600-IWDX-1200-I
WDX-600-Ⅱ
Oscillation DM (Dynamic Modulation)
MD ratio: 0 to 100 %,  Sweep ON/OFF
Output power
600 W 1200 W 600 W
Output frequency
28 kHz, 75 kHz 40 kHz, 120 kHz
Power source 200V - 240V AC
50/60Hz 1200VA
200V - 240V AC
50/60Hz 2400VA
200 - 240V AC
50/60Hz 1200VA
Dimension 330(W)×462(D)×148(H)mm  
(exclude raised part, foot)
Weight 11 kg
12 kg 11k g
list1 I/O interface: Output power ON/OFF (contact point)
          Irregular output warning (Relay output)
list1 Output power control : 0 to 100 %
list1 Display: Output power (W),  DM ratio (%), Error message
list1 Operating condition: Tmp.: 0 to 40 deg C, Rel. Hmd: 0 to 80 % (no condensation)
list1 Power cord: 3.5 m
list1 Option: Transducer block

矢印Option Parts



Example setup
Example set up


        

Vibration unit

仕様
* Customization of vibration unit is available.
N Type | Immersible boxN type 投込みタイプ
TypeWDX-600N-IWDX-1200N-IWDX-600N-Ⅱ
Generator
WDX-600-I WDX-1200-I WDX-600-Ⅱ
Max. Input Power 600W 1200W
600W
Frequency 28, 75kHz 
40kHz, 120kHz
Effective Area 350x200 
420x300
350x200
Dimension
WxDxH mm
(exclude raised part)

350x200x100 420x300x100 350x200x75
Material Case: SUS304 (SUS316L optionally available)
Weight 14 kg 18 kg 11 kg
list1 Liquid temperature: 5 - 80 deg. C
list1 Transducer : Bolt-clamped Langevin type
list1 Vibration unit cord length: 2.5 m(blade part 2m) + Output cord length 3.5 m

F Type | Vibration plateF type 振動板タイプ
TypeWDX-600F-IWDX-1200F-IWDX-600F-Ⅱ
Generator WDX-600-I WDX-1200-I WDX-600-I
Max. Input Power 600W 1200W 600W
Frequency 28, 75 kHz 40, 120 kHz
Effective Area 350x200 
420x300
350x200v
Dimension
WxDxHmm
(wires not inclulded)

390x240x83
t=2.5 mm
460x340x83
t=2.5 mm
390x240x57
t=2.5 mm
Material Plate: SUS304 (SUS316L, hastelloy optionally available)
Packing: EPDM t=3mm (viton or others optionally available)
Weight 10k g 16 kg 8 kg
list1 Liquid temperature: 5 - 100 deg. C
list1 Transducer : Bolt-clamped Langevin type
list1 Vibration unit cord length: 3.5 m + Output cord length 3.5 m

 make to order S Type | TankS type 槽タイプ
TypeWDX-600S-IWDX-1200S-IWDX-600S-Ⅱ
Generator 
WDX-600-I WDX-1200-I WDX-600-Ⅱ
Max. Input Power 600W 1200W 600W
Frequency 28, 75 kHz 40, 120 kHz
Effective Area 366x246
500x300
366 x 246
Dimension
WxDxHmm
(exclude raised part,
include rubber foot)
outer 422x302x405
500x350x402 422x302x405
inner 366x246x248(23 L) 500x300x224(35 L)
366x246x248(23 L)
Material Tank: SUS304 (SUS316L, hastelloy optionally available)
Weight 22 kg 39 kg 19 kg
list1 Liquid temperature: 5 - 100 deg. C
list1 Transducer : Bolt-clamped Langevin type
list1 Vibration unit cord length: 3.5 m
list1 Option: Basket (KG10, KG11)

矢印to Option Parts


make to order SH Type | Tank with heaterSH type ヒーター付槽タイプ
TypeWDX-600SH-IWDX-1200SH-IWDX-600SH-Ⅱ
Generator  
WDX-600-I WDX-1200-I WDX-600-Ⅱ
Max. Input Power 600 W 1200 W 600 W
Frequency 28, 75 kHz 40, 120 kHz
Heater 200V AC 50/60Hz 2kW 200V AC  50/60Hz 3kW 200V AC  50/60Hz 2kW
Effective Area 370x250
500x300
370x250
Dimension
WxDxHmm
(exclude raised part, include rubber foot)
outer 580x310x406 710x360x405 580x310x406
inner 370x250x250
(23 L)
500x300x224
(35 L)
370x250x250
(23 L)
Material Tank: SUS304 (SUS316L optionally available)
Weight 28 kg 46 kg 25 kg
list1 Liquid temperature: 5 - 100 deg. C
list1 Transducer : Bolt-clamped Langevin type
list1 Vibration unit cord length: 3.5 m
list1 Option: Basket (KG10, KG11)
* Heater is for water only. Do not use other liquid.
* Separate power source for the heater is required.

矢印to Option Parts


Industrial Equipment TEL:81-532-41-2774