SEMICONDUCTOR PROMOTION DIVISION

W-357P-50

Cleaning(High Frequency）

semiconductor、LCD cleaning
The ultrasonic spray nozzle cleaners for 400kHz type

W-357P50


●Using higher-frequency magahertz energy with accelerrated water molecules,submicron level cleaning is possible,without damaging sensitive microelectronicdevice.
●Applications include: cleaning of liquid crystal displays(LCDs),flat panel displays(FPDs), sillicon(or GaAs,sapphire,etc.)wafers (post-CMP,pre-diffusion,etc.), photomasks, reticules and numerous other applications where submicron particle removal is required.
●There is no worry of the re-adhesion of dirt in the liquid to always supply a clean cleaning solution.
●There is no worry of the re-adhesion of dirt in the liquid to always supply a clean.
●Minute dirt is instantaneously removed for the high frequency oscillation.
●It is possible to wash it at ease by the output adjustment even by the one like the magnetic head that cracks easily.
■Features
　 This housing allows for wider cleaning areas using
lower frequency ultrasonic (400kHz) and higher power (100W). 　
Model W-357P-50
High Frequency Output 100Ｗ（output adjustment)
Oscillation Frequency 400kHz（nominal）
Power Supply AC 100V/3A
Range of Liquid temperature 20～50℃
Transducer nozzle（mm） Φ8.0
Water Supply 3.5 L/min(L　type conector)　
Outside Dimension(mm) Generator 232（W）×342（D）×137（H）
Nozzle Φ60×135
Weight Generator 8kg
Nozzle 0.7kg
Water Intake R(PT)1/2inch elbow; (Applicable tube:inner dia.11min.outer dia.13mm)
Output Cable 5m
Power Supply Cable 2m
Protection Circuit Dry operation prevention cable,
alarm output cable ５m
Material PCTFE/Silicon rubber/Tantalum/PTFE

Semiconductor Promotion Division TEL:81-532-41-2774 MAIL:semi@honda-el.co.jp