SONIC MONITOR HUS-3
Others
| Essential product for the management of the cleaning quality |
| Portable product thanks to the rechargeable battery |
| Model |
HUS-3 |
| Measurable frequency |
10kHz～5MHz |
| Power supply |
Dedicated lithium-ion polymer battery: HBT-001 DC14.8V 1.5W |
| Battery charger |
Dedicated battery charger: BT-024 |
| Signal input |
1 sensor |
| Measurement range |
10mV/50mV/100mV/500mV |
Dimensions
W x D x H (mm) |
180x130x50 without projection portion |
| Weight （ｋｇ） |
0.64（including the lithium battery）
|
| Measurement readout |
Detected voltage by sensor (mV) RMS value |
| Operating temperature |
5 to 40℃ |
|
□Accessories: AC adaptor for charging, Dedicated lithium-ion polymer battery,
Dedicated case
□Optional parts: ：Charging stand, Sleeve for point sensing |
| Model |
HUS-5 SPS |
HUS-5 SPL |
HUS-5 SUS |
HUS-5 SUL |
| Shape |
Straight type |
L-shaped type |
Straight type |
L-shaped type |
| Material |
Quartz glass |
SUS316L |
| Total length (mm) |
340 |
250（Short section: 80） |
340 |
250（Short section: 80） |
| Cable length |
1.5m |
| Weight (kg) |
0.08 |
0.14 |
| Operating liquid temp. |
0 to 70℃ |
| Unmeasurable liquid |
Heated strong alkali, Phosphoric acid, Hydrofluoric acid |
All acids |
|
| ● |
Applicable to the wide range of frequency, 10kHz - 5MHz |
| ● |
Easy to carry the built-in rechargeable battery (Possible to use for approx.
10 hours)
|
| ● |
Possible to monitor putting the end of the sensor |
| ● |
Available to provide the customized length of the sensor |
| ● |
Process management of the cleaning equipment |
| ● |
Checking if the ultrasonic cleaner is operating correctly |
| ● |
Checking the planar distribution uniformity with the ultrasonic cleaning |
| *It is impossible to calibrate this product. |
| *Continuous operation may be a cause of the trouble. |
